Looking after your vehicle graphics
Follow these simple guidelines and your vehicle livery could stay on for years till your next upgrade:
- If using a spray maintain an angle greater than 45° to the vehicle. Maintain nozzle more than 1200mm from livery edges. Maximum 75 bar water pressure
- Use a mild detergent, clean water and a soft brush
- Or use a fan spray of water
- Maximum water temperature 38°C
- Avoid lettering tips and corners and any obvious vulnerable areas.
Avoid these
- Do not direct high-pressure water at the edges of the sheeting
- Do not hold the nozzle closer than 1200mm to the livery
- Do not direct water at an angle less than 45°
- Do not use solvents, abrasives, alcohol-based cleaners or vehicle under-body cleaning solutions
- Do not use tar and glue/traf fic film removers
- Do not steam clean liveries